BOPP烟包膜

BOPP 烟包包装膜(普通型/收缩型)

BOPP cigarette tobacco wrapping film for packets (plain/shrinkage)

BOPP香烟条包包装膜(普通/收缩型)。a)BOPP烟草膜一般用于软包/硬包香烟,适配现代高速或低速包装机;为双拉聚丙烯透明烟膜,共挤双面热封并含抗静电保护。厚度18—25微米;宽度90—350毫米;长度2000—3500米。b)中收缩型热封BOPP烟膜,匹配高速包装机,常用规格22微米×105—420毫米×2800米。c)高收缩型热封BOPP烟膜,匹配高速包装机。用途:广泛用于软包和硬包香烟条包包装。特点:超高透明度和光泽、超高拉伸强度、超高阻油性、油墨和涂层附着优异、低静电、厚度均匀性好、膜…

厚度21/22 μm
类别BOPP烟包膜
幅宽按需定制
纸芯1″ / 2″ / 3″ / 6″

批量下单前可先寄样 · 起订量与交期以正式报价单为准。

产品介绍

BOPP香烟条包包装膜(普通/收缩型)。a)BOPP烟草膜一般用于软包/硬包香烟,适配现代高速或低速包装机;为双拉聚丙烯透明烟膜,共挤双面热封并含抗静电保护。厚度18—25微米;宽度90—350毫米;长度2000—3500米。b)中收缩型热封BOPP烟膜,匹配高速包装机,常用规格22微米×105—420毫米×2800米。c)高收缩型热封BOPP烟膜,匹配高速包装机。用途:广泛用于软包和硬包香烟条包包装。特点:超高透明度和光泽、超高拉伸强度、超高阻油性、油墨和涂层附着优异、低静电、厚度均匀性好、膜卷端面平整、卷绕紧实。技术参数:厚度0.018—0.024毫米;克重16—22克/平方米;挺度不小于11毫米;热封强度不小于300克;水汽透过率不超过10克/平方米/24小时;抗粘连(40℃、湿度40%条件下24小时不粘连);无异味;雾度不超过2.2%;45°光泽度不低于75%;膜卷紧实、两端切口平整、卷内无接缝(必要时每卷接头不超过一处标记,且不超过每批交货量的10%)。最高热封温度不超过180℃。可按客户要求印刷OEM标识、私标或按特定尺寸与包装方式供货。

产品要点

  • 高透明

技术参数

性能项目单位典型值:AEC21典型值:AEC22企业标准国标国际标准
密度g/cm³0.9050.905——ASTM D1505
厚度μm2122Q/SD2GB/T6672-2001—
克重g/m²19.019.9———
收率/出膜率m²/kg52.650.3———
拉伸强度(纵向(MD))N/mm²160150Q/SD2GB/T1040-1992ASTM D882
拉伸强度(横向(TD))N/mm²287280Q/SD2GB/T1040-1992ASTM D882
断裂伸长率(纵向(MD))%172180Q/SD2GB/T1040-1992ASTM D882
断裂伸长率(横向(TD))%6360Q/SD2GB/T1040-1992ASTM D882
热收缩率(纵向(MD))%3.53.2Q/SD2GB/T12026-2000ASTM D1204-89
热收缩率(横向(TD))%2.82.5Q/SD2GB/T12026-2000ASTM D1204-89
杨氏模量(纵向(MD))N/mm²22001980Q/SD2—ASTM D882
杨氏模量(横向(TD))N/mm²39003300Q/SD2—ASTM D882
热封强度N/15mm2.62.7Q/SD2QB/T2358-1998ASTM F88-94
热封温度范围°C120 ~ 150120 ~ 150Q/SD2QB/T2358-1998ASTM F88-94
摩擦系数—0.200.20Q/SD2GB/T10006-1988ASTM D1894-93
雾度%1.31.5Q/SD2GB2410-1980ASTM D1003-95
(45°) (光泽度)%85.085.0Q/SD2GB8807-1988ASTM D2457

典型值——具体公差以报价单为准。

应用领域

用于软包与硬包香烟的小盒及条盒外包装,普通型与收缩型可按包装机速度选择;膜面平整、滑爽度稳定,适应高速烟包机的上机要求,印刷适性好,可配合防伪定位印刷与拉线使用。

供应与出口

BOPP 烟包包装膜(普通型/收缩型) 在 AEC GROUP 体系内生产与分切,可按幅宽与纸芯规格供应大卷、分切卷或片材,配出口包装、原产地证及进口商所需单证。告诉我们用途、厚度与年用量,我们会确认牌号、起订量与交期。

English original / 英文原文

Product description

BOPP cigarette tobacco wrapping film for packets (plain/shrinkage) is a BOPP cigarette packaging film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. A.) BOPP cigarette tobacco film generally used for soft/hard tobacco pack and used for modern high/slow packing machines. transparent biaxially oriented polypropylene cigarette film featured coextruded heat sealable on both sides,incorporated with anti- static protection Thickness : 18,19,20, 21,22 ,25 Microns Width: 90,110,118,120,135,150,220,350MM Length:2000M, 2800M,3000M ,3500M bopp tobacco film or bopp cigarette film also called as bopp shrinkage cigarette film,Polypropylene cigar film,BOPP soft cigarette pack film, BOPP hard rigit tobacco film, bopp tobacco pack film, bopp tear tape tobacco film Well-fitting to machine, suitable for high speed packing of all kinds of soft pack. Available in 21/22 μm thickness.

Key Features

  • High clarity
  • High clarity and gloss
  • Excellent moisture barrier
  • Good machinability on high-speed packing lines
  • Tear-tape compatible
  • Stable heat seal

Applications

  • Soft/hard tobacco pack
  • Used for modern high/slow packing machines
  • High speed packing of
  • Cigarette hard pack overwrapping
  • Cigarette soft pack overwrapping

Product Details

BOPP cigarette tobacco wrapping film for packets (plain/shrinkage)

a.) BOPP cigarette tobacco film generally used for soft/hard tobacco pack and used for modern high/slow packing machines.
transparent biaxially oriented polypropylene cigarette film featured coextruded heat sealable on both sides,incorporated with anti- static protection
Thickness : 18,19,20,21,22,25 Microns
Width: 90,110,118,120,135,150,220,350MM Length:2000M,2800M,3000M,3500M
bopp tobacco film or bopp cigarette film also called as bopp shrinkage cigarette film,Polypropylene cigar film,BOPP soft cigarette pack film, BOPP hard rigit tobacco film, bopp tobacco pack film, bopp tear tape tobacco film Well-fitting to machine, suitable for high speed packing of all kinds of soft pack. Special hot slip ability on surface,can avoid machine-blocking,sticking etc. Quick heat sealing at low temperature and pressare. Good foldability after forming. Inferior optical properties to others.
Customer's own requirement is available for us such as printed OEM logos and private label or particular size and package style.
b.) Half-shrinkage BOPP Cigarette Film with heat sealable matches high-speed packaging machines.

Size: 22Microns*105mm*2800M

22Microns*110mm*2800M

22Microns*115mm*2800M

22Microns*118mm*2800M

22Microns*120mm*2800M

22Microns*125mm*2800M

22Microns*130mm*2800M

22Microns*135mm*2800M

22Microns*225mm*2800M

22Microns*350mm*2800M

22Microns*380mm*2800M

22Microns*420mm*2800M

c.) High-shrinkage BOPP Cigarette Film with heat sealable matches high-speed packaging machines.

2. Usage

It is widely used in packaging soft and hard tobacco cigarette packets

3. Packing: Use carton and kraft paper and bobble film to packing as inner package, and use pallets and wood board to packing as outer package

4. Featuring :

Super high transparency and glossy,Super high tensile strength
Super high grease barrier, Excellent ink and coating adhesion
Low static electricity,Superior thickness uniformity
Smoothness of the vertical section and much compact of film rolls winding

4. Technology data:
TYPICAL VALUES AND PHYSICAL PROPERTIES

Specification of Polypropylene film (PP Film)
Size: 100 mm. * 3,600 m.
Size: 115 mm. * 3,600 m.
Size: 122 mm. * 3,600 m.
1. Type Biaxially Oriented Polypropylene,
Maximum temperature seal does not over than 180 °C
2. Core Inside diameter of core 76mm., Thickness of core 8mm.
The length as width of PP Film
3. Thickness 0.018 – 0.024 mm.
4. Basis Weight 16 – 22 gms./ m²
5. Stiffness Not less than 11mm.
6. Heat – Seal Strength Not less than 300gms
7. Water Vapour Permeability Not over than 10gms/m²/24hours
8. Blocking Resistance Not tightly sealed at a pressure of 35 gms/m²
Period of 24 hours at 40°C, Humidity 40%
9. Odour Odourless
10. Haze Not over than 2.2%
11. Gloss : 45° Not less than 75%
12. General Appearance Tightly rol l
Incision is flat at both sides.
Seamless in the roll. If necessary the joints do not exceed
one mark per roll, But not over than 10% of each delivery.
By mark cleanly.
PS. the seller must specify the temperature when use

5. Standard Dimensions

As a professional packaging film manufacturer in China, AEC GROUP supplies BOPP cigarette tobacco wrapping film for packets (plain/shrinkage) for soft/hard tobacco pack. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.

Technical data

Property (项目)Unit (单位)Typical Value: AEC21Typical Value: AEC22Testing Standard: Corporate (企业标准)Testing Standard: National (国标)Testing Standard: International (国际标准)
Density (密度)$g/cm^3$0.9050.905——ASTM D1505
Thickness (厚度)μm2122Q/SD2GB/T6672-2001—
Unit weight (克重)$g/m^2$19.019.9———
Yield (收率/出膜率)$m^2/kg$52.650.3———
Tensile strength (拉伸强度) - MD$N/mm^2$160150Q/SD2GB/T1040-1992ASTM D882
Tensile strength (拉伸强度) - TD$N/mm^2$287280Q/SD2GB/T1040-1992ASTM D882
Elongation at break (断裂伸长率) - MD%172180Q/SD2GB/T1040-1992ASTM D882
Elongation at break (断裂伸长率) - TD%6360Q/SD2GB/T1040-1992ASTM D882
Heat shrinkage (热收缩率) - MD%3.53.2Q/SD2GB/T12026-2000ASTM D1204-89
Heat shrinkage (热收缩率) - TD%2.82.5Q/SD2GB/T12026-2000ASTM D1204-89
Young’s modulus (杨氏模量) - MD$N/mm^2$22001980Q/SD2—ASTM D882
Young’s modulus (杨氏模量) - TD$N/mm^2$39003300Q/SD2—ASTM D882
Heat sealing strength (热封强度)N/15mm2.62.7Q/SD2QB/T2358-1998ASTM F88-94
Temperature range of heat sealing (热封温度范围)°C120 ~ 150120 ~ 150Q/SD2QB/T2358-1998ASTM F88-94
Friction co-efficient (摩擦系数)—0.200.20Q/SD2GB/T10006-1988ASTM D1894-93
Haze (雾度)%1.31.5Q/SD2GB2410-1980ASTM D1003-95
(45°) Gloss (光泽度)%85.085.0Q/SD2GB8807-1988ASTM D2457

Applications

OUR SERVICE

•Your inquiry related to our product & price will be replied within 24 hours.

•Well-trained & experienced staff are ready to answer all your inquiries in English or other language.

•Working time: 8:30am – 17:30pm, Monday to Friday (UTC+8).

•Your business relationship with us will be confidential to any third party.

•Good after-sale service offered. Please feel free to contact us if you have any more information or question.

Q1: Are you A Manufacturer or A Trading Company?

A: we are not only More than ten years professional manufacturer and this anhui eastern communication company  is our factory's own import and export company. Mainly deal with oversea market’s exporting business!

But also have a specialty sales team of ages experienced international trade business. We can do transportation easily By sea, By air, By trains and by Air-express. Easily transact several transportation methods, such as mixed loading container, less than container loading, full container loading.

Plus, Anhui Eastern Communication Imp.& Exp. Co., Ltd. 
Is an integrated companies approved by China National Ministry of Foreign Trade and General Administration of Customs. The company, as a full-invested subsidiary company of Asia Pacific Industry group Co., Limited, has its own independent import and export rights. Registered in Hefei City, Anhui Province, P.R. China.

Here you’ll find up: Highly active, very convenient, professional specialty, vitality and vigor, zero-distance service!

Q2: Can you OEM and ODM?

A: We have high-advanced production equipment to ensure the quality of buyer’s order. Meanwhile there is a dedicated design team to help with the sample artwork for free. On the other hand your design will be 100% safe under NDA.

Q3: Can we get some samples from factory?

A: Yes, you can get available sample in our stock. Free for samples, but shipping fees is for buyer’s account. And after firm order, we will return the shipping fees to buyers or deduct the shipping fees from buyer’s firm order payment.

Q4: Can you accept the major currencies all over the world?

Yes, We can. And we can accept the payment currency, such as: USD, EUR,HKD,GBP,JPY,AUD,RMB(CNY) and so forth.

And our company ‘s bank name as follow:

Bank Of Communications Co., Ltd. (Anhui Branch)

By the way, please highly noted: because many risks when buyer remit the payment to seller, for example, The network hacker: seller issue the PI ( Proforma invoice) to buyer, but when buyer send the advance deposit payment to seller, seller’s bank account was informed being changed, and let buyer send to the seller’s other nominated bank account. After seller send the payment to buyer, he won’t find the receptor forever. This is risk,.

So here we declare to all of our buyers:

Anhui Eastern Communication Imp.& Exp. Co., Ltd. And Asia Pacific International Co., Limited are our companies who deal with our exporting business, and any other third company are not our company.

Additionally, regarding to Iran buyers, we particularly issue the Kunlun bank for all of our Iran buyer, so that all of our Iran buyer can send their payment to us directly from their Iran local bank, it was convenience and safety for buyers.

Q5: How to control your quantity and quality?

A.   1) A complete quality guarantee system: IQC→ FAS & Self-checking for each process→ OQC;

    2) IS09001: 2008 system, SGS,  BV.COTECNA, SONCAP  approved

   3.) Third parties to inspection

Q6: How can we get a quote?

A: Buyer can get our quotation via Email (all of our email are    @boppfilmsale.com), Tel, Fax, On-line Ali-trademanager, Mobile (cellphone) message, Skype,Msn, or any other methods. Please offer us the specification of the product that you need, then we will quote our price to you Within 2 hours during the working time, and within 12 hours during non-working time, and Within 24 hours during the holidays.

需要 BOPP 烟包包装膜(普通型/收缩型)?

告诉我们厚度、幅宽、数量与目的国,我们会回复价格与寄样方案。