BOPP电容器膜

BOPP安全防爆电容膜

BOPP Capacitor Film (Safety, Anti-Explosion)

专为安全型电力电容器设计的聚丙烯电容器膜,金属化层可在故障状态下自愈式清除,防止灾难性击穿。相比标准电容器膜,其防爆结构为交流功率因数补偿电容器及电机运转电容器提供额外的安全保障。

厚度3-7μm
类别BOPP电容器膜
幅宽按需定制
纸芯1″ / 2″ / 3″ / 6″

批量下单前可先寄样 · 起订量与交期以正式报价单为准。

产品介绍

专为安全型电力电容器设计的聚丙烯电容器膜,金属化层可在故障状态下自愈式清除,防止灾难性击穿。相比标准电容器膜,其防爆结构为交流功率因数补偿电容器及电机运转电容器提供额外的安全保障。

产品要点

  • 安全防爆结构
  • 自愈式金属化层
  • 厚度 4-15 μm
  • 交流电力电容器级

技术参数

表格 1:产品类型与基材代码
产品代码基材电镀/金属层类型特征描述
MPPA聚丙烯 - PP单面铝标准单面铝层
MPETA聚酯 - PET单面铝标准单面铝层
MPPAD聚丙烯 - PP双面铝双面铝层
MPETAD聚酯 - PET双面铝双面铝层
MPPAH聚丙烯 - PP单面铝边缘加厚
MPETAH聚酯 - PET单面铝边缘加厚
MPPAZ聚丙烯 - PP单面锌铝锌铝复合层
MPETAZ聚酯 - PET单面锌铝锌铝复合层
MPPAZHX聚丙烯 - PP单面锌铝加厚边+网格型安全膜
MPETAZHX聚酯 - PET单面锌铝加厚边+网格型安全膜
MPPAT聚丙烯 - PP单面铝T 型安全膜
MPETAT聚酯 - PET单面铝T 型安全膜

字母代码释义:

  • M:金属化 | PP:聚丙烯薄膜 | PET:聚酯薄膜

  • A:铝金属层 | AZ:锌铝复合金属层

  • D:双面金属化 | H:边缘加厚金属层

  • X:网格/网状安全膜 | T:T 型安全膜

  • 表格 2:留边类型代码

留边代码留边位置适用产品
S单侧留边留边产品(如 MPPA、MPPAD、MPPAH、MPPAZ)
T双侧留边留边产品
M中间留边留边产品
( / 空白)无留边 / 全幅金属化无留边产品(如 MPETAD 6×35)
表格 3:规格表示规则
字段序号代表含义单位示例:8 × 75 × 2.5
第一段薄膜名义厚度μm8μm
第二段金属化薄膜宽度mm75mm
第三段留边宽度 / 无留边产品则省略mm2.5mm
表格 4:型号命名与配置示例
完整型号类型留边厚度幅宽留边详细描述
MPETA-S-6×8×2MPETAS6 μm8 mm2 mm单面镀铝聚酯薄膜,单侧留边。
MPPAZH-S-6×10×1.5MPPAZHS6 μm10 mm1.5 mm单面锌铝镀层聚丙烯薄膜,左侧单边加厚。
MPETAD-6×35MPETAD(无)6 μm35 mm(无)双面镀铝聚酯薄膜,无留边。
MPPAZX-S-6×8×2MPPAZXS6 μm8 mm2 mm单面锌铝镀层聚丙烯网格型安全膜,单侧留边。

典型值——具体公差以报价单为准。

供应与出口

BOPP安全防爆电容膜 在 AEC GROUP 体系内生产与分切,可按幅宽与纸芯规格供应大卷、分切卷或片材,配出口包装、原产地证及进口商所需单证。告诉我们用途、厚度与年用量,我们会确认牌号、起订量与交期。

English original / 英文原文

Product description

BOPP Capacitor Film (Safety, Anti-Explosion) is a metallized BOPP capacitor film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. BOPP (Polypropylene) capacitor film silver metallized Al or Zn/Al safety and anti-explosion (explosion- protection ) The capacitor of safety-film and the mechanism of explosion protection. Available in 4-15 μm thickness.

Key Features

  • Safety/anti-explosion design
  • Self-healing metallized layer
  • Thickness 4-15 μm
  • AC power capacitor grade
  • Low dielectric loss
  • High breakdown strength

Applications

  • AC motor capacitors
  • Other electronic parts
  • Film capacitors
  • Power electronics
  • Motor run capacitors

Product Details

BOPP (Polypropylene) capacitor film silver metallized Al or Zn/Al safety and anti-explosion (explosion- protection )
The capacitor of safety-film and the mechanism of explosion protection.
Polypropylene capacitor film purpose-built for safety-type power capacitors, engineered so the metallized layer self-clears under fault conditions to prevent catastrophic breakdown. Its anti-explosion construction adds a protective margin over standard capacitor film for AC power-factor correction and motor-run capacitors.
Items: BOPP capacitor film (clear and silver metallized) (3-12/15/18 Microns
------------------------------------------------------------------------------------------------
1. BOPP capacitor film -safety
1.) M-PP for metallized -film capacitors applications .
2.) S-PP for foil-film capacitors applications .
------------------------------------------------------------------------------------------------
2. BOPP capacitor film-rough(BOPP rough clear capacitor film)
1.) R-PP : one side of rough capacitor film (power capacitor use).
2.) RR-PP: two sides of rough capacitor film
------------------------------------------------------------------------------------------------
3. BOPP capacitor film silver metallized Zn/Al
------------------------------------------------------------------------------------------------------------------------
4. BOPP capacitor film silver metallized Al
------------------------------------------------------------------------------------------------
5. BOPP capacitor film silver metallized Al or Zn/Al safety and anti-explosion (explosion-proof )
------------------------------------------------------------------------------------------------
Tips: Certification: ISO9001, ISO14001, OHSMS18000
Each product has its own special,natural,outstanding soul!
One company (anhui eastern communication) offer BOPP Metallized Capacitor Film (silver) products to the world market sufficiently.
Great largest market bone great largest enterprises, and great demand of BOPP Metallized Capacitor Film (silver) all over the world pushs our company (anhui eastern communication) growing largest scales.
Key data: The standard thickness range including: 3 ,4,5,6,7,8,9,10,12 microns .
The standard tolerance thickness: 4-15 μm+/-0.2 Um .
The width range including: can slit any width(MM )upon the requirement.
The inner core : 3" (76MM) The outer core:
1. Base PP film for silver metallized PP capacitor film
Capacitor-used film: plated PP film's surface with a thin metal layer.
2. metallized BOPP capacitor film
The high pure aluminum or zinc melting, in under high vacuum evaporation, precipitation to the surface base film, plastic film is formed a thin layer of metal layer after membrane surface.
3. self-healing , self-healing function of self-healing
Metallized film dielectric after local breakdown immediately instinctively to the electrical properties of the phenomenon of breakdown before.
4. margin, left side margin
The need for the actual production of capacitors, metallized film on one side or both sides of the edge or middle cover form without steaming blank metallized insulation strip (strip) called the edge, its width is called the margin.
5. square resistance, The sheet resistance of square resistance
The metal layer of metal film on the unit square area of the resistance value is called the square resistance, expressed by Omega /, usually with square resistance to represent the thickness of the metal coating.
6. metallized safe film, metallic safety film metallized safety film
The metal pattern layer containing metal film fuse safety structure. According to the structural characteristics of fuse safety can be divided into grid security film, security film and T series safety film etc..
Though more then ten years research in the developed countries, safety film for capacitors of explosion protection has come into the large-scale production.
Its unique inner net-shaped structure is a new explosion protection mode.
Specification for Metallized polyester film and polypropylene film for capacitors
2. Usage: It was widely used for AC motor capacitors and other electronic parts
3. Packing: carton and pallets (use cartons and kraft paper and bobble film to packing as inner package, and use pallets and wood board to packing as outer package)
OUR SERVICE
•Your inquiry related to our product & price will be replied within 24 hours.
•Well-trained & experienced staff are ready to answer all your inquiries in English or other language.
•Working time: 8:30am – 17:30pm, Monday to Friday (UTC+8).
•Your business relationship with us will be confidential to any third party.
•Good after-sale service offered. Please feel free to contact us if you have any more information or question.
How can we get a quote? A: Buyer can get our quotation via Email (all of our email are @boppfilmsale.com), Tel, Fax, On-line Ali-trademanager, Mobile (cellphone) message, Skype,Msn, or any other methods. Please offer us the specification of the product that you need, then we will quote our price to you Within 2 hours during the working time, and within 12 hours during non-working time, and Within 24 hours during the holidays.
How to visit us for buyers? It was very glad for us to accept any buyer who visit us, and in our workroom, your can see the highest technology for Metallized BOPP/BOPET capacitor film machines. And you will know more for our goods & us.

As a professional packaging film manufacturer in China, AEC GROUP supplies BOPP Capacitor Film (Safety, Anti-Explosion) for ac motor capacitors. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.

Technical data

表格 1:产品类型与基材代码 (Product & Metal Layer Classification)
Code (产品代码)Base Film (基材)Metallization Type (电镀/金属层类型)Feature Description (特征描述)
MPPAPolypropylene (聚丙烯 - PP)Single-sided Aluminum (单面铝)Standard single Al layer
MPETAPolyester (聚酯 - PET)Single-sided Aluminum (单面铝)Standard single Al layer
MPPADPolypropylene (聚丙烯 - PP)Double-sided Aluminum (双面铝)Double Al layer
MPETADPolyester (聚酯 - PET)Double-sided Aluminum (双面铝)Double Al layer
MPPAHPolypropylene (聚丙烯 - PP)Single-sided Aluminum (单面铝)Heavy edge (边缘加厚)
MPETAHPolyester (聚酯 - PET)Single-sided Aluminum (单面铝)Heavy edge (边缘加厚)
MPPAZPolypropylene (聚丙烯 - PP)Single Zinc-Aluminum (单面锌铝)Zinc-Aluminum composite layer
MPETAZPolyester (聚酯 - PET)Single Zinc-Aluminum (单面锌铝)Zinc-Aluminum composite layer
MPPAZHXPolypropylene (聚丙烯 - PP)Single Zinc-Aluminum (单面锌铝)Heavy edge + BT Composite Mesh Safety (加厚边+网格型安全膜)
MPETAZHXPolyester (聚酯 - PET)Single Zinc-Aluminum (单面锌铝)Heavy edge + BT Composite Mesh Safety (加厚边+网格型安全膜)
MPPATPolypropylene (聚丙烯 - PP)Single-sided Aluminum (单面铝)T-type Safety Film (T型安全膜)
MPETATPolyester (聚酯 - PET)Single-sided Aluminum (单面铝)T-type Safety Film (T型安全膜)

字母代码释义 (Code Elements Meaning):

  • M: Metallization (金属化) | PP: Polypropylene film (聚丙烯薄膜) | PET: Polyester film (聚酯薄膜)

  • A: Aluminum coating (铝金属层) | AZ: Zinc-Aluminum composite coating (锌铝复合金属层)

  • D: Double-sided metallization (双面金属化) | H: Heavy edge metal layer (边缘加厚金属层)

  • X: Grid/Mesh safety film (网格/网状安全膜) | T: T-type safety film (T型安全膜

  • 表格 2:留边类型代码 (Edge / Free Margin Classification)

Edge Code (留边代码)Margin Position (留边位置)Applicable Product Types (适用产品)
SOne side of the film (单侧留边)Margin products (e.g., MPPA, MPPAD, MPPAH, MPPAZ)
TBoth sides of the film (双侧留边)Margin products
MMiddle of the film (中间留边)Margin products
(None / 空白)No margin (无留边 / 全幅金属化)No margin products (e.g., MPETAD 6x35)
表格 3:规格表示规则 (Specification Rule)
Section (字段序号)Indication (代表含义)Unit (单位)Example: 8 × 75 × 2.5
1st SectionNominal thickness of film (薄膜名义厚度)μm8 μm
2nd SectionMetallized film width (金属化薄膜宽度)mm75 mm
3rd SectionFree margin width (留边宽度 / 无留边产品则省略)mm2.5 mm
表格 4:型号命名与配置示例 (Model Examples)
Full Model (完整型号)Product Type (类型)Edge Type (留边)Thickness (厚度)Width (宽度)Margin (留边)English Description (详细描述)
MPETA-S-6×8×2MPETAS6 μm8 mm2 mmSingle aluminum metallized polyester film, free margin on one side.
MPPAZH-S-6×10×1.5MPPAZHS6 μm10 mm1.5 mmSingle zinc-aluminum metallized polypropylene film with single heavy edge on the left side.
MPETAD-6×35MPETAD(None)6 μm35 mm(None)Double-sided aluminum metallized polyester film, no free margin.
MPPAZX-S-6×8×2MPPAZXS6 μm8 mm2 mmSingle zinc-aluminum metallized polypropylene mesh type safety film, free margin on one side.

需要 BOPP安全防爆电容膜?

告诉我们厚度、幅宽、数量与目的国,我们会回复价格与寄样方案。