Bopp Capacitor Film

BOPP clear rough film for capacitors

BOPP 电容器薄膜(透明)

BOPP clear rough film for capacitors is a metallized BOPP capacitor film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China.

Thickness6-18μm
CategoryBopp Capacitor Film
WidthMade to order
Core1″ / 2″ / 3″ / 6″

Samples available before bulk order · MOQ and lead time confirmed in writing with the quotation.

About this film

BOPP clear rough film for capacitors is a metallized BOPP capacitor film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. With kinds of Dipping Oil but with small Swelling. Mainly used for Baptist paper composite membrane oil medium or total capacitor dielectric film Baptist Oil: such as high-voltage capacitor and capacitor for electric induction heating system,etc. Available in 6-18μm thickness.

Key Features

  • High clarity
  • Low dielectric loss
  • High breakdown strength
  • Excellent self-healing performance
  • Uniform metallization

Applications

  • Film capacitors
  • Power electronics
  • Motor run capacitors
  • Lighting ballasts

Product Details

BOPP clear rough film for capacitors
Features: Impulse a deep-rough treatment into single side or double sides on the surface of the film in order to form some certain concave ,then let the film be characteristic even roughness ,low dielectric loss, and high dielectric strength and good compatibility with kinds of Dipping Oil but with small Swelling. Mainly used for Baptist paper composite membrane oil medium or total capacitor dielectric film Baptist Oil: such as high-voltage capacitor and capacitor for electric induction heating system,etc. Specification: Thickness: 6UM—15UM

As a professional packaging film manufacturer in China, AEC GROUP supplies BOPP clear rough film for capacitors for film capacitors. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.

Key points

  • High clarity

Technical data

Properties (特性项目)Unit (单位)Typical Values (典型值)Test Conditions (测试条件)
Tensile strength (拉伸强度) - MDMPa140Stretching speed 100mm/min @23℃, 50% r.h.
Tensile strength (拉伸强度) - TDMPa200Stretching speed 100mm/min @23℃, 50% r.h.
Elongation at break (断裂伸长率) - MD%150—
Elongation at break (断裂伸长率) - TD%50—
Thermal shrinkage (热收缩率) - MD%3.515 min @ 120℃
Thermal shrinkage (热收缩率) - TD%1.515 min @ 120℃
Space factor (空间系数) - Average%

9.0 (For 6~9μm)


10.0 (For 10~18μm)

@ 23℃
Space factor (空间系数) - Limited%

Max 15


Min 6

@ 23℃
Surface roughness (表面粗糙度)μm0.25 — 0.65@ 23℃
BDV (DC) (直流击穿电压)V/μm520at 23℃ air
Relative permittivity (相对介电常数)—2.250Hz or 1kHz @23℃
Volume resistivity (体积电阻率)$\Omega \cdot m$$5.0 \times 10^{15}$@ 23℃
Dielectric dissipation factor ($\tan\delta$)—$2 \times 10^{-4}$50Hz or 1kHz @23℃
Item (项目)Unit (单位)\multicolumn{10}{c}{Specifications & Values (规格与数值)}
Thickness MMV (名义厚度)μm68
Thickness WMV (重量厚度)μm5.57.4
Tolerance (公差) - Average%$\pm 3$$\pm 3$
Tolerance (公差) - Individual%$\pm 9$$\pm 9$
Final film roll width (成品卷宽)mm\multicolumn{10}{c}{40 ~ 700 (or slit according to customers' request)}
Inner diameter (纸芯内径)mm\multicolumn{10}{c}{76.2 / 152.4}
Note: Unusual specifications can be negotiated and specified additionally.

Typical values — tolerances are confirmed in the quotation.

Supply & export

Produced and converted within the AEC GROUP, BOPP clear rough film for capacitors is supplied in jumbo rolls, slit rolls or sheets to your width and core size, with export packing, certificate of origin and the documents your importer needs. Tell us the application, thickness and annual volume and we will confirm the grade, MOQ and lead time.

中文简介与参数 / Chinese information

Product description

BOPP电容器用透明粗化薄膜。特点:对薄膜单面或双面进行深度粗化处理,使表面形成规则的微观凹坑,从而具有均匀的粗糙度、低介质损耗、高介电强度,并与各类浸渍油相容性好、溶胀小。主要用于浸渍纸复合膜油介质或全膜电容器的浸渍介质,如高压电容器、电感应加热系统电容器等。规格:厚度6—15微米。

Technical data

性能项目单位典型值测试条件
拉伸强度(纵向(MD))MPa140拉伸速度 100 mm/min,23 °C、50% RH
拉伸强度(横向(TD))MPa200拉伸速度 100 mm/min,23 °C、50% RH
断裂伸长率(纵向(MD))%150—
断裂伸长率(横向(TD))%50—
热收缩率(纵向(MD))%3.5120 °C × 15 min
热收缩率(横向(TD))%1.5120 °C × 15 min
空间系数(平均)%

9.0(6~9 μm)


10.0(10~18 μm)

@ 23℃
空间系数(限值)%

最大 15


最小 6

@ 23℃
表面粗糙度μm0.25 — 0.65@ 23℃
( ) (直流击穿电压)V/μm52023 ℃ 空气中
相对介电常数—2.250 Hz 或 1 kHz,23 °C
体积电阻率Ω · m5.0 × 10^{15}@ 23℃
介质损耗角正切(tanδ)—2 × 10^{-4}50 Hz 或 1 kHz,23 °C
项目单位}{ & (规格与数值)}
名义厚度μm68
重量厚度μm5.57.4
公差(平均)%± 3± 3
公差(单卷)%± 9± 9
成品卷宽mm40 ~ 700(或按客户要求分切)
纸芯内径mm}{76.2 / 152.4}
注:特殊规格可另行协商指定。

Need BOPP clear rough film for capacitors in your specification?

Send thickness, width, quantity and destination — we will reply with a price and a sample plan.