BOPP Thermal Lamination Film
Typical Thickness
BOPP Thermal Lamination Glossy Film 24mic=12mic BOPP Film +12mic EVA
BOPP Thermal Lamination Matt Film 25mic=15mic BOPP Film +10mic EVA
BOPP Thermal Lamination Matt Film 28mic=15mic BOPP Film +13mic EVA
THICKNESS TOLERANCE
|
±1.5Micro
|
WIDTH
|
300mm---1580mm(±5mm)
|
LENGTH
|
100-6000m
|
PAPER CORE (INNER DIA)
|
25.4mm(1'),76mm(3'),152mm(6”)
|
CONNECTOR
|
≤1
|
Features
1. Environmental-protection, no pollution, gained national environmental-protection certification
2. Can be widely used as coating of books, and packing box for wine, tobacco, and medicine, with no latent threat to consumers health
3. Strong stick capability
4. Can greatly improve saturation of colors, and glabrousness of surface
5. No bubble, wrinkle or desquamate
6. Can process UV, coating, stamping, and other after print procedures on part of laminated surface
7. Can simplify production techniques, and purchase channel, reduce costs; fast and convenient
Applications
Covers
Books, magazines, periodicals, brochure, etc.
Packaging
Crates or boxes for liquor, food and beverage, medicine, cosmetics and other daily consumer products and bags etc.
Trade-shows
Advertisement products, Photos, documents, billboards, certificate,etc.
BOPP/BOPET/MPP/MPET THERMAL LAMINATING FILM,
BOPP or PET base film and EVA adhesive, used in Printed matter (Books, magazines, leaflet, poster, etc.), Packaging (Crates or boxes for liquor, food, beverage, medicine, cosmetics and other daily consumer products, etc.) & Digital printing: (Photos, documents, billboards, etc.).
Applications:
1.film lamination for covers of book, magazines, catalogs, documents, picture, etc
2.film lamination for packing box, shopping bags, advertisement, etc.
Item specification (thickness)
1. Gloss BOPP thermal laminating film
22, 24, 27 micron
2. Matt BOPP thermal laminating film
22, 25, 27, 30 micron
3. PET thermal laminating film
24 micron
Width: 200mm ~ 1350mm
Length: 2000m, 3000m
Paper core (inter dia. ): 76mm (3")
Connector: <2
Corona treatment side: A (inside); B (outside); A/B (double sides);
Surface tension (corona treated): > 38 dyne
Application manual
lamination temperature: 85 ~ 105 degree
lamination pressure: 5 ~ 15 Mpa
lamination speed: 10 ~ 50 meters / minute
Packing: with boxes and pallets
Advantages of thermal laminating film (gloss & matt):
1.Enhance the finished presswork? value through high transparent and super gloss finish. Prevent lamination from being pressed, bubbled and desquamate. Protect from harmful substances and water-proof, making long life storage for the printings.
2.Available in various paper and inks, and suitable for lamination even with powder paper. After be treated with corona on the surface, it is good for spot UV and hot stamping.
3.Excellent cost saving because the works of adhesive mixing, coating and drying are all not needed. The operation doesn? require special technique and the film can be used in dry and wet laminator.
4.Environmental friendly and non-hazardous to health and safe because there is not any toxic gases or volatile content emitting during production and use.