产品介绍
双面可热封 BOPP 薄膜两面都能热封,给复合与包装设备留下更大余量:不论是正面还是反面朝内,都能形成稳定封口。热封强度高、透明度好,厚度 18–30 μm,适合高速包装线的连续封合。
用于食品、糖果、日化产品的枕式包装与袋装,也常与印刷膜复合使用。
产品要点
- 双面可热封
- 高透明
- 厚度范围宽
技术参数
| 性能项目 | 单位 | 测试方法 | 公差 | 典型值 |
| 厚度 | μm | — | ±3% | 18 - 30 |
| 出膜率 | m²/kg | — | ±3% | 55 |
| 单位重量 | gm/m² | — | ±3% | 18.5 |
| 拉伸强度(纵向 MD) | N/mm² | ASTM D 882 | 最小 | 120 |
| 拉伸强度(横向 TD) | N/mm² | ASTM D 882 | 最小 | 240 |
| 断裂伸长率(纵向 MD) | % | ASTM D 882 | ± 20 | 160 |
| 断裂伸长率(横向 TD) | % | ASTM D 882 | ± 10 | 50 |
| 弹性模量(纵向 MD) | N/mm² | ASTM D 882 | 最小 | 2000 |
| 弹性模量(横向 TD) | N/mm² | ASTM D 882 | 最小 | 3400 |
| 热收缩率(纵向 MD) | % | 空气中,130 °C 烘箱 5 min | 最大 | 4 |
| 热收缩率(横向 TD) | % | 空气中,130 °C 烘箱 5 min | 最大 | 2 |
| 雾度 | % | ASTM D 1003 | 最大 | 2.5 |
| 光泽度 | G.U. | ASTM D 2457 | 最小 | 85 |
| 摩擦系数 | — | ASTM D 1894 | ± 0.05 | 0.3 |
| 水蒸气透过量 | g/m² · 24 h | ASTM E 96-66 / BS 3177 (@ 38 °C, 90% RH) | 最大 | 8.3 |
| 氧气透过率 | cc/m² · 24 h · bar | ASTM D1434 / BS 2782–514 A (@ 23 °C, 0% RH) | 最大 | 2200 |
| 热封环 | °C | OPMA METHOD | — | 120 - 145 |
| 密度 | kg/m³ | ASTM D 1505 | ± 0.05 | 0.91 |
典型值——具体公差以报价单为准。
供应与出口
双面热封聚丙烯薄膜 在 AEC GROUP 体系内生产与分切,可按幅宽与纸芯规格供应大卷、分切卷或片材,配出口包装、原产地证及进口商所需单证。告诉我们用途、厚度与年用量,我们会确认牌号、起订量与交期。
English original / 英文原文
Product description
Two Sides Heat Sealable Polypropylene Film is a heat sealable BOPP film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. BOPP film heat-sealable on both sides, giving flexibility for lamination and packaging machines that need to seal from either face. Provides strong hot-tack, high transparency and stable performance across a range of thicknesses. Available in 18-30 μm thickness.
Key Features
- Heat sealable both sides
- High transparency
- Wide thickness range
- Reliable heat sealing on high-speed lines
- High clarity
- Good hot tack and seal strength
Applications
- Packaging of grainy foods such
- Flow wrapping
- Snack packaging
- Bread and bakery packaging
- Vertical form-fill-seal packaging
Product Details
Heat Sealable BOPP FilmHeat sealable BOPP film production line consists of casting sheet extrusion, biaxial orientation, after treatment, rolling, cutting, and automatic control. It can produce BOPP films of various specifications and stable dimensions, with good mechanical and electrical performances, good heat resistance, cold resistance and gastightness.
BOPP film heat-sealable on both sides, giving flexibility for lamination and packaging machines that need to seal from either face. Provides strong hot-tack, high transparency and stable performance across a range of thicknesses.
| Parameter | Value |
| Thickness | 15UM,18UM,20UM, 23UM ,25UM,28UM,30UM,35-52UM |
| Width | 90MM-1600MM |
| Length | 2000M ,3000M ,4000M ,7000M,8000M |
| Corona treated side | Single(one) side or double (two)sides |
| Heat sealable | Single(one) side or double (two)sides |
| Application | packaging flowers ,cigarette packs ,tea and so forth |
| Color | Transparent ,clear |
| Package method | Use carton with Bubble film around rolls for inner package ; |
| U se wooden or plastic pallets for outer package. | |
| Inner core | 76 mm(3') ,152mm(6') |
| Loading details | 1. Use 20GP ,40GP ,40HQ . |
| 2. Per 20GP . With pallets , can load 12-15 tons . If the width of the roll is less than 500MM (such as 350MM) ,can load 12 tons , otherwise ,width of the roll is more than 500MM (such as 900MM ) can load about 15 tons . Without pallets , per 20GP can load 16-18 tons , of course the width of the roll is the key for the quantity loading under the same case . | |
| 3. Per 40GP ,With pallets(usually use 40HQ ), can load 24-25 tons . If the width of the roll is less than 500MM (such as 350MM) ,can load 24 tons , otherwise ,width of the roll is more than 500MM (such as 900MM ) can load around 25 tons . Without pallets , per 40GP can load 26-27 tons , of course the width of the roll is the key for the quantity loading under the same case . |
| Featuring details : |
| Clear, plain BOPP film, specially designed for packaging of grainy foods such as candies and chocolates. It is suitable for high-speed automatic packaging machines and manual packaging machines. |
| Main Properties |
| Excellent properties of dustproof, moistureproof, air resistant and fragrance retention |
| Light weight, outstanding wring performance, nice metal adhesion property |
| Non static electricity, unflammable, nice weather fastness |
| Specifications |
| Thickness:18~52 micron |
| Width: 90~1200 mm |
| Customized dimensions and specifications are available upon request. |
| FILM DESCRIPTION: |
| Two sides heat sealable; one side treated co extruded biaxial oriented polypropylene transparent film, suitable for: |
| Rotogravure and flexographic printing. |
| Lamination with similar films, paper or other films. |
| Horizontal and vertical packaging machines (HFFS – VFFS). |
| General over wrapping purposes. |
| CHARACTERISTICS |
| Two sides heat sealable with excellent hot tack. |
| High transparency. |
| Excellent ink adhesion on treated side. |
| High resistance to oil, grease, chemicals, puncture and abrasion. |
| Good barrier to moisture, odors and gases. |
| APPLICATIONS: |
| Food packaging: |
| Biscuit, pasta, snacks, confectionary, chips, tea, and bakery. |
| Non–food packaging: |
| Stationary, textiles, gifts, and flowers. |
| ROLL SPECIFICATION: |
| Width N mm (or suitable to container size) |
| Inner diameter 76 mm(3') ,152mm(6'), |
| Outer diameter N mm (approx) |
As a professional packaging film manufacturer in China, AEC GROUP supplies Two Sides Heat Sealable Polypropylene Film for packaging of grainy foods such. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.
Technical data
| Properties | Unit | Test method | Tolerance | Typical value |
| Thickness | micron | — | ±3% | 18 - 30 |
| Yield | $m^2/kgm$ | — | ±3% | 55 |
| Unit weight | $gm/m^2$ | — | ±3% | 18.5 |
| Tensile strength (MD) | $N/mm^2$ | ASTM D 882 | Min. | 120 |
| Tensile strength (TD) | $N/mm^2$ | ASTM D 882 | Min. | 240 |
| Breaking elongation (MD) | % | ASTM D 882 | ± 20 | 160 |
| Breaking elongation (TD) | % | ASTM D 882 | ± 10 | 50 |
| Modulus of elasticity (MD) | $N/mm^2$ | ASTM D 882 | Min. | 2000 |
| Modulus of elasticity (TD) | $N/mm^2$ | ASTM D 882 | Min. | 3400 |
| Heat shrinkage (MD) | % | In air, in oven for 5 min. at 130 °C | Max. | 4 |
| Heat shrinkage (TD) | % | In air, in oven for 5 min. at 130 °C | Max. | 2 |
| Haze | % | ASTM D 1003 | Max. | 2.5 |
| Gloss | G.U. | ASTM D 2457 | Min. | 85 |
| Coefficient of friction | — | ASTM D 1894 | ± 0.05 | 0.3 |
| Water vapor permeability | $g/m^2 \cdot 24 hrs$ | ASTM E 96-66 / BS 3177 (@ 38 °C, 90% RH) | Max. | 8.3 |
| Oxygen permeability | $cc/m^2 \cdot 24 hrs \cdot Bar$ | ASTM D1434 / BS 2782–514 A (@ 23 °C, 0% RH) | Max. | 2200 |
| Heat Seal Ring | °C | OPMA METHOD | — | 120 - 145 |
| Density | $kgm/m^3$ | ASTM D 1505 | ± 0.05 | 0.91 |