产品介绍
通用BOPP(双向拉伸聚丙烯)薄膜,通过纵横两个方向拉伸聚丙烯制成,强度高、透明度好、防潮性佳,是普通膜、花卉包装膜、印刷膜等各类BOPP产品的基材,厚度范围3-75微米。
产品要点
- 双向拉伸,兼具强度与透明度
- 防潮
- 多类 BOPP 产品的基材
技术参数
技术数据(物理性能),供客户参考:
BOPP PLAIN FILM
标准:GB/T 1003-96。
1、上机性
项目 | 正品级 | 合格 | 轻微 | 测试方法 | 标记 | ||||||
纵向拉伸强度 |
| GB13022-91 |
|
| |||||||
纵向伸长率 |
| GB13022-91 |
|
| |||||||
弹性模量(3 天后) Mpa | GB13022-91 | ≥1700 | ≥1700 | ||||||||
热收缩率(%) |
| GB/T1003-96 |
|
| |||||||
雾度(%) | GB2410-80 | ≤1.2 | ≤1.5 | ||||||||
透明度稳定性(%) | GB2410-80 | ≥85 | / | ||||||||
光泽度(%) | GB8807-88 | ≥90 | ≥85 | ||||||||
润湿张力(mN/m) | GB/T14216-93 | ≥39 | ≥38 | ||||||||
摩擦系数(%) |
| GB/10006-88 |
|
| |||||||
2、尺寸
项目 | 正品级 | 合格 | 轻微 | ||||
尺寸稳定性 | ±3.0% | ±4.5% | ±7.0% | ||||
平均尺寸稳定性 | ±2.5% | ±4.0% | / | ||||
长度稳定性 |
|
| / | ||||
接头长度 |
| >500M | / | ||||
幅宽稳定性 | ≤±2mm | >±2mm | / |
3、外观
项目 | 正品级 | 合格 | 轻微 | 测试方法 | 标记 |
纸芯损伤 | 序号 | 序号 | 是 | 目测 | O |
端面损伤 | 序号 | 轻微 | 严重 | 目测 | B |
接头 | 允许 1 个接头 | 2 个接头 | 5 个接头 | 目测 | J |
允许 | |||||
翘曲 | ≤1mm | ≤3mm | >3mm | 尺测 | P |
端面翘边 | 序号 | 序号 | 明显 | 目测 | G |
凹坑 | 序号 | 序号 | / | 目测 | V |
颜色差异 | 序号 | 明显 | / | 目测 | D |
压伤 | 序号 | 明显 | 明显 | 目测 | R |
污染 | 序号 | 序号 | 目测 | W | |
鼓泡 | 外径 <0.5mm 一或两个, 外径 <0.5mm 三 | 是 | / | 目测 | K |
漏料 | 序号 | 轻微 | 严重 | 目测 | H |
达因值差异 | ≥38 | ≥36 | U | ||
损伤 | 序号 | 轻微 | 严重 | X | |
幅宽 | ±1 | ±2 | A | ||
长度差异 | 按客户要求 | 透光差异 | 严重 | 电脑检测 | C |
4、卷材质量
项目 | 正品级 | 合格 | 轻微 | 测试方法 | 标记 |
凹坑 | 幅宽 1000 mm 以下 ≤50 m 幅宽 1000 mm 以上 ≤100 m | ≤250m | / | 目测 | F |
内层凹陷 | 序号 | 序号 | >300m | 目测 | L |
纵向 标记 | 序号 | 序号 | 目测 | T | |
横向标记 | 序号 | 序号 | / | 目测 | M |
斑点 | 序号 | 轻微 | / | 目测 | Q |
典型值——具体公差以报价单为准。
供应与出口
BOPP薄膜 在 AEC GROUP 体系内生产与分切,可按幅宽与纸芯规格供应大卷、分切卷或片材,配出口包装、原产地证及进口商所需单证。告诉我们用途、厚度与年用量,我们会确认牌号、起订量与交期。
English original / 英文原文
Product description
Bopp film is a biaxially oriented polypropylene (BOPP) packaging film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. General BOPP (biaxially-oriented polypropylene) film, produced by stretching polypropylene in both machine and transverse directions to build strength, clarity and moisture resistance. Serves as the base film for plain, flower-wrap, printing and other BOPP film products across a 3-75 micron thickness range. Available in 3-75 μm thickness.
Key Features
- Biaxially oriented for strength & clarity
- Moisture resistant
- Base film for multiple BOPP products
- High clarity and gloss
- High tensile strength
- Good moisture barrier
Applications
- Lamination
- Food packaging
- Gift wrapping
- Carton overwrapping
- Adhesive tape base film
Product Details
Plain BOPP Film (Bi-axially Oriented PolyPropylene) For Printing And Lamination
General BOPP (biaxially-oriented polypropylene) film, produced by stretching polypropylene in both machine and transverse directions to build strength, clarity and moisture resistance. Serves as the base film for plain, flower-wrap, printing and other BOPP film products across a 3-75 micron thickness range.
BOPP film is widely used for plain, lamination, matte and metalized films which are used for many different sorts selection of applications, such as carton box, flower, gift, food, confectionery, lamination, CD, DVD, VCD, cigarette, and box packaging, packing tape, etc according to its purpose such as printing, clothes, tape and laminating which are used for many different sorts of applications as the selection follow.
BOPP film is a packing film with a superior mechanical nature, transparent and moisture proof formed through the processing of draft Bi-axially Oriented Polypropylene (BOPP) vertically and horizontally.
| Parameter | Value |
| Thickness | 10UM, 12UM ,15UM,18UM for lamination , 20UM, 23UM ,25UM,28UM,30UM,35-52UM for printing , 23UM ,25UM,28UM for adhesive tape's basic material , 35UM,37UM,40UM,50UM for BOPP Bag's basic material, |
| Width | 350MM-1600MM |
| Length | 2000M ,3000M ,4000M ,7000M,8000M,9000M |
| Corona treated side | Single(one) side or double (two)sides |
| Heat sealable | Non-heatsealable |
| Application | Printing, lamination , Aluminium metallization and so forth |
| Color | Transparent ,clear |
| Inner core | 76 mm(3') ,152mm(6') |
| Package method | Use carton with Bubble film around rolls and (wooden or plastic) pallets |
| Loading details | 1.Use 20GP ,40GP ,40HQ . 2. Per 20GP . With pallets , can load 12-15 tons . If the width of the roll is less than 500MM (such as 350MM) ,can load 12 tons , otherwise ,width of the roll is more than 500MM (such as 900MM ) can load about 15 tons . Without pallets , per 20GP can load 16-18 tons , of course the width of the roll is the key for the quantity loading under the same case . |
Featuring details :
Main Properties
High transparency and gloss
High tensile strength
High grease barrier
Excellent ink and coating adhesion
Low static electricity
Superior thickness uniformity
Smooth rolling and neat ends of film rolls
Specifications
Thickness:12~52 micron
Width:350~1600 mm
Customized dimensions and specifications are available upon request.
As a professional packaging film manufacturer in China, AEC GROUP supplies Bopp film for lamination. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.
Technical data
Tech Data ( Physical Properties) For Customer Reference :
BOPP PLAIN FILM
Standard : GB/T1003-96.
1、Machinability
Items | Prime | Eligible | Weak | Test method | Marking | ||||||
Tensile strength in machine |
| GB13022-91 |
|
| |||||||
Elongation in machine |
| GB13022-91 |
|
| |||||||
Elasticity(Three days later) Mpa | GB13022-91 | ≥1700 | ≥1700 | ||||||||
Thermal contraction % |
| GB/T1003-96 |
|
| |||||||
Haze % | GB2410-80 | ≤1.2 | ≤1.5 | ||||||||
Transparency stability % | GB2410-80 | ≥85 | / | ||||||||
Gloss % | GB8807-88 | ≥90 | ≥85 | ||||||||
Wettability mN/m | GB/T14216-93 | ≥39 | ≥38 | ||||||||
Fraction coefficient % |
| GB/10006-88 |
|
| |||||||
2、Dimension
Items | Prime | Eligible | Weak | ||||
Dimensional Stability | ±3.0% | ±4.5% | ±7.0% | ||||
Average Dimensional Stability | ±2.5% | ±4.0% | / | ||||
Length Stability |
|
| / | ||||
The length of junction |
| >500M | / | ||||
Width Stability | ≤±2mm | >±2mm | / |
3、Appearance
Items | Prime | Eligible | Weak | Test method | Marking |
Damage of core | NO | NO | YES | By sight | O |
Damage of edge | NO | A LITTLE | BADLY | By sight | B |
Joint | One joint is allowed | 2 joints | 5 joints | By sight | J |
allowed | |||||
Deflection | ≤1mm | ≤3mm | >3mm | By ruler | P |
Warp on edge | NO | NO | Obviously | By sight | G |
Dent | NO | NO | / | By sight | V |
Color distinction | NO | Obviously | / | By sight | D |
Bruise | NO | Obviously | Obviously | By sight | R |
Contamination | NO | NO | By sight | W | |
Balloon | Diameter <0.5mm One or two, diameter<0.5mm three | Yes | / | By sight | K |
Material leakage | NO | Lightly | Badly | By sight | H |
Dyne distinction | ≥38 | ≥36 | U | ||
Damage | No | Lightly | Badly | X | |
Width | ±1 | ±2 | A | ||
Length distinction | Do as clients | Light distinction | Badly | By computer | C |
4、Roll’s quality
Items | Prime | Eligible | Weak | Test method | Marking |
Dent | Width below 1000mm≤50m Width above 1000mm≤100m | ≤250m | / | By sight | F |
Dent inside | No | No | >300m | By sight | L |
Longitudinal marking | No | No | By sight | T | |
Traversenal marking | No | No | / | By sight | M |
Blotch | No | Lightly | / | By sight | Q |